blogtopsites.com

Showing posts with label sewage treatment plant design. Show all posts
Showing posts with label sewage treatment plant design. Show all posts

Wednesday, 21 August 2019

How do Sewage Treatment Plants Work? | Chokhavatia Associates

The importance of sewage treatment plant design is to withhold all the solids as much as possible and before the leaving water called an effluent is discharged to the environment. The solid matter decays it uses oxygen that are needed by the water plants and animals.


Water Recycle 
With the ongoing water scarcity in cities and towns the only way ahead to treat the sewage water by sewage treatment  plant so that the non-hazardous water can be reused to increase the surface water or recharge the ground table water.
How does a Sewage Treatment Plant Work?
Sewage Treatment works in four different methods first the waste goes through the initial process called the preliminary method where most of the course solids are removed. This process includes large filtering READ MORE.....

Tuesday, 11 June 2019

Why Industries Using Sewage Treatment Plants for Removing Pollutants ? | Chokhavatia Associates

In order to free the water consumed for irrigation or drinking and even household purposes from all sorts of harmful contaminants, Sewage Treatment Plant plays a quite crucial phenomenon. The containments present in the waste water should be significantly decreased by getting rid of bacteria, suspended solids and all other organic wastes as well as chemicals that make the water polluted so that can be reused again.

Sewage Treatments denotes domestic wastewater management and seeks removal of pollutants from household sewage that consists of domestic and runoff. On an average, environmental engineers are accountable for designing and erecting facilities where wastewater is to be treated. There are various ways and means as physical, chemical besides biological approaches through which wastewater can be treated and is sent back to the environment so that it can be reused.

The most accepted Sewage Treatment Plant that is usually set up for treating sewage embraces three stages-i.e. entire procedure has to undergo primary, secondary &tertiary stage of treatment. In the very first step solids are mined out from the waste water and it is through usage of home cultivated water borne micro-organisms dissolved matter is transformed into solid masses. Residues remained are there after nullified and then after thrown away or re-used.  Thus, the water gets disinfected either physically or chemically with the support of lagoons or microfiltration.

In the end, the water that has been treated is now discharged into either river, stream, wetland or either it can be reused for irrigating farms.

The treatment plant developed for cleaning sewage works to eradicate suspended solids in addition to bio chemical oxygen demanding waste also known as BOD as this helps to reduce fish kill, as of diminishing oxygen levels that can leave adverse effects on marine life.  Diverse forms of treatment are as follows.

1. Primary Treatment

In this phase substances that can be removed effortlessly from waste water are eradicated as oil /fat/ racks and even trash..

2. Secondary Treatment 

This procedure cuts down the biological toxins that are present inside the sewage. At this juncture micro-organism are assisted to eliminate the undesirable elements present in the sewage.

3. Tertiary Treatment

This step emphasises on the betterment of the quality of the water, prior to sending back to the environment for usage for all purposes. This can be accomplished either by treating it by artificial filters or by natural filters like marshlands and even lagoons. With the help of treatment excess phosphorus and nitrogen can be removed.

For total removal of microrganism, a treatment plants have to often take a treatment of chlorination prior to release of treated waste water. Ultimately this chlorine is being eliminated from water after being chemically treated by sulphur di oxide reaction; and this helps in making water safe for the life that is dependent on it.

At last, this treated water is released in river, ponds lakes or even sea whatever is the closest destination. There are lots of services providers who provide solutions to fix drainage problems in a very cost effective manner.

Chokhavatia Associates have put up more than 37 years of experience with a global client base. Our services in environmental sector include concept to commissioning of Wastewater Treatment Plants for the industries and sewage treatment plants.

Monday, 11 September 2017

Sewage Treatment Plant’s Design- Workflow- Significance

The pace of industrialization is exponential that the adverse effect caused by it is contributing to the environmental concerns. Though people are aware of the limitations in water resources, water pollution still prevails. Thousands of gallons of sewage water are being released everyday by numerous factories and industries which adds to the pollution of both land and water sources. Sewage treatment plants do the work of removing the contaminants from sewage water before it getting expelled into environment.

Work Flow and Sewage treatment plant Design
Sewage treatment plant design are simple in their built up and working procedures. The various stages in the sewage treatment have the following process involved in it.



Primary Stage/Sedimentation
The primary stage happens in huge tanks which involves sedimentation of heavy solid waste while liquid impurities like grease, oil floats to the surface. The liquid impurities are then separated from the solid waste by clarifiers and the process is known as clarification.

Secondary Stage/Aeration
Aeration is the part of secondary stage of sewage treatment. It involves the process of sludge activation which is done by pumping air into the tank using large sized fans called aerators. The impure organic contamination in the sewage water has a very high demand for biological oxygen and aeration provides oxygen to bacteria for treating the wastewater. The bacteria help in gathering sludge impurities and it is removed. The aeration tank design and the process of aeration have a direct impact in the efficiency of sewage treatment plant.

Tertiary stage/Disinfection
The tertiary stage in the sewage treatment plant is the disinfection process. The treated sewage water from the earlier stages is disinfected either chemically or physically to remove the toxic contents and thus making it fit to discharge into the local water bodies.


Significance of Sewage treatment plants
Sewage treatment plants play significant part in controlling the water pollution. The contaminated water which is drained makes an imbalance in the aquatic ecosystem and when the untreated water is used for irrigational purposes the fertility of the land is completely lost. The major reason behind the life crisis in some of the underdeveloped countries is because of the absence of proper sewage treatment systems making the state of life miserable.

Maintenance of Sewage treatment plants
As sewage treatment plants functions round the calendar the maintenance schedule of the treatment plant should be strict. The energy should be efficiently used and knowledge about the various machines involved in the treatment process is vital. The machineries like clarifiers and aerators are the most integral part in the treatment process and hence there should be regular inspection in their working condition. There should be no compromise in the quality and maintenance procedures of the machinery used in process as it may lead to lack of efficient functioning. The clarifiers should not get clogged with the solid impurities and the filaments in aeration tanks must be cleaned regularly from the biological built up which not only increases its energy consumption but also reduces the efficiency rates. The aerators should be cleaned from biological growth as it may lead to improper sludge deposition.